Dayton, OH

In Centerville, our expert heating inspections recently revealed a minor issue with a flame sensor. Trust us for thorough inspections and reliable service to keep your heating system running smoothly.

Today in Dayton, our team conducted a thorough drain inspection, including a camera inspection of the main sewer line. Trust us for high-quality service and expert solutions for all your plumbing needs. Unlock peace of mind with our professional drain services.

Albert Services sent an Einstein technician to West Carrolton for a water line repair on a Payne furnace. Trust our pink and blue trucks for Plumbing, Electrical, Drain, and HVAC needs. Contact us for quality service and reliable solutions.

Our team recently conducted a thorough heating inspection on a heat pump and air handler in the Centerville area. During the inspection, we discovered a very dirty coil and promptly performed a chemical cleaning to restore optimal functionality. Trust us for professional HVAC maintenance and services in your area.

Looking for heating inspection services in Huber Heights? Our team identified a faulty flame sensor during a recent inspection. Trust us for reliable heating maintenance and repairs in the area.

In the Dayton Ohio area, we offer thorough heating inspections. Our expert technicians recently found and replaced a faulty flame sensor, ensuring your heating system operates safely and efficiently. Trust us to keep your home warm this winter.

If you need hot water heater repair or replacement in the Dayton area, our professional team can help. We recently replaced an old unit with a 40-gallon short model and corrected the flue pipe slope for optimal performance. Contact us for all your hot water heater needs!

Our team provides seasonal preventative maintenance for heating systems in Centerville. With our Genius Club service, we check and clean equipment to ensure safety and efficiency. Experience peace of mind knowing your heating system is in top condition. Contact us today for expert maintenance at your convenience.

For expert water line repair in West Carrolton, trust Albert Services. Our skilled technicians specialize in main water line repair and bypass valve removal to ensure your water system functions properly. Contact us for fast and reliable service.

I addressed a leaking washer box issue in a vacant property today. The existing washer box valves were corroded and causing water to drip. I began by shutting off the water supply and carefully removing the old valves. To resolve the issue, I installed new SharkBite push-to-connect valves, which provide a durable, leak-free connection. After re-pressurizing the system, I tested the new valves to ensure proper function and confirmed there were no further leaks. The system is now fully operational.

I repaired a Bradford White gas water heater that was experiencing intermittent heating. After testing the unit, I determined the thermocouple was faulty. I replaced it with a compatible Bradford White thermocouple kit. I then tested the water heater to ensure the burner was igniting properly and heating the water to the correct temperature. The customer now has a reliable hot water supply again.

Today, I installed a high-efficiency water softener system in a customer’s home. The system was connected to the main water line, and I configured the unit’s digital controller for optimal regeneration cycles based on the household's water usage. After installation, I tested the water before and after the softening process, confirming a significant reduction in mineral content. This will help protect the home’s plumbing and appliances from scale buildup, ensuring better water quality throughout the home.

I performed a camera drain inspection from the roof vent to the street. The customer was experiencing frequent clogs, so I accessed the plumbing system through the vent and used a sewer inspection camera to inspect the entire line. The camera allowed me to identify root intrusion near the street connection, which was causing the blockages. With this information, we can now plan for proper clearing and future maintenance to keep the drain line in good condition and prevent further issues.

I performed a hydro jetting service to clear a severely clogged main sewer line today. The line was blocked by tree roots, and snaking wasn’t sufficient. I used a Jetter with a 4000 PSI nozzle to blast the blockage away. Afterward, I performed a camera inspection using a Ridgid SeeSnake to confirm the line was clear, ensuring the customer’s plumbing system was functioning properly again.

I installed a Zoeller M53 sump pump in a customer’s basement today. Their old pump had failed, causing minor flooding. I removed the old pump and installed the new one with a PVC discharge line, ensuring proper drainage away from the foundation. I also tested the pump by filling the sump pit with water to verify that the float switch activated the pump correctly.

I repaired a 50-gallon Rheem electric water heater today. The unit was not heating properly, and after diagnosing the problem, I found the upper heating element was faulty. I replaced the damaged element with a new 4500-watt Rheem OEM part. After the repair, I tested the water heater, ensuring it was functioning efficiently and heating water to the proper temperature.

Today in Dayton, we performed a professional flush and tune on a 75-gallon natural gas water heater. Our expert service ensures optimal performance and efficiency for your water heating needs. Trust us for top-notch water heater maintenance in Dayton.

Our team installed a new 40-gallon water heater and sump pump in Englewood today. Trust us for expert plumbing services to keep your home running efficiently.

In Centerville, our thorough heating inspection ensures your system is in top working condition. Our team found the entire system operating smoothly during the inspection, providing you with peace of mind and comfort in your home.

I installed a new Trane XR16 air conditioner for a customer today. The old unit was beyond repair, so we upgraded to a more efficient system. I started by removing the old condenser and indoor coil, then installed the new outdoor condenser and matched it with an indoor evaporator coil. I also replaced the line set and installed a new Honeywell thermostat to ensure optimal performance.

I completed a drain cleaning service today. The customer had a clogged kitchen drain due to grease buildup. I used a Rigid K-400 drum machine with a 3/8" cable to clear the blockage. After running the cable through the line multiple times, the drain was flowing smoothly again. I also recommended using Bio-Clean to help maintain the drains and prevent future clogs.

Our team provided preventive maintenance on two HVAC systems in a Dayton home. The downstairs system is good, but the upstairs furnace needs replacing. We also installed a new light fixture in the bedroom. All other systems are functioning properly.

I provided a free quote for roughing in a basement bathroom and installing a washer and dryer in the customer’s garage. For the bathroom, I assessed the layout and determined the necessary placement for the plumbing lines, including the drain, venting, and water supply lines for the toilet, sink, and shower. In the garage, I reviewed the space for the washer and dryer installation, identifying the requirements for the hot and cold water lines, drainage, and 220V electrical outlet for the dryer. The quote includes labor, materials, and any necessary permits to complete both projects efficiently.

Performed a flush and tune service on a 75-gallon natural gas water heater in Dayton. Drained the tank to remove sediment buildup, improving efficiency and extending the unit’s lifespan. Inspected the anode rod for corrosion and checked the gas burner for proper ignition and combustion. Tested the thermostat for accurate temperature control and verified the operation of the pressure relief valve. The water heater is now functioning efficiently, providing consistent hot water to the home.

Completed a furnace inspection in Kettering to ensure efficient operation for the upcoming colder months. Inspected the heat exchanger for cracks and cleaned the burner assembly for improved combustion. Tested the ignition system and checked the flame sensor to ensure proper functionality. Verified the blower motor was working efficiently and checked the thermostat calibration. The furnace is now ready for reliable performance throughout the winter season.